Check Your Brake Fluid Level

, , , , ,
check brake fluid des moines iowa

check brake fluid des moines iowa If you don’t consider yourself a mechanic or have an aversion to working on cars, it makes sense that you prefer to let the professionals deal with any issues. But in reality, there are many things the average driver and non-mechanic can do to keep a car running properly. Some of those things include checking oil levels, tire pressure, lights, etc. Here’s one more thing you can do. Check your brake fluid level.

Watch for the Warning Signs
Your anti-lock brake system requires brake fluid running through the lines from under the hood of your car to the brakes on your wheels. Newer cars have electronic sensors that light up your dash when your car is running low on brake fluid. If the brake pedal feels like you’re pressing on a sponge or it’s extra hard to press down, your car may be low on brake fluid.

There are other reasons your brakes might not be working properly, like won brake pads and rotors, pulling to one side when you step on the brakes, or excessive vibrations, particularly at slower speeds. But checking your brake fluid is a good way to eliminate other problems. And it’s easy.

1. Open the hood of your car with the engine cooled off.

2. Locate the Master Cylinder, and you’ll find the reservoir that contains the brake fluid. It’s usually towards the back of the car behind the engine. If you’re not sure where the brake fluid reservoir is, check the owner’s manual for your car, or consult Dr. Google.

3. After you find the brake fluid reservoir, check the fluid levels based on the markers for   “min” and “max” If it’s low and below the “min” mark, add some brake fluid. Make sure you only add the kind of brake fluid your car requires (DOT 3, DOT 4, DOT 5). Be sure to clean the exterior of the reservoir before you remove the cap to prevent any dirt or debris from contaminating the brake lines. And make sure you don’t spill any. Brake fluid is toxic and corrosive.

4. Once you’ve added brake fluid, replace the cap and close the hood.

5. In some cases, simply topping off the brake fluid reservoir can improve the performance of your brakes. But if you experience further problems with your brakes, bring in your car and we’ll take a look at what’s going on. Your pads and rotors might need to be replaced, you could have a leak in your brake line, or the brake lines could be contaminated with copper which can happen over a long period of time.